Menu
Sandwich panel is a system that protects the buildings from external factors and provides the utmost convenient and economical solution for them to have a powerful stand. As modern, light and durable construction elements, sandwich panels are used to clad roofs and external walls of the buildings as well as achieving insulated internal walls and cold storages.
Sandwich panels are protecting the buildings against the external factors on all sides of your building. Sandwich panels are produced by filling in a thick and low-density insulation material between two thin and high-density metal surfaces. These ready-assembled building elements, which have a high load carrying capacity despite their own low weight, are produced on continuous lines.
Different insulation materials should be chosen according to the needs of the buildings. Sandwich panel production is made in different insulation types including PUR, PIR. You can decide which type of sandwich panel is suitable for your building/project by taking into consideration the thermal, humidity, sound insulation and fire resistance needs of thereof. Surface sheet thickness of sandwich panels ranges from 0.300 mm to 0.700 mm.
Different insulation materials should be chosen according to the needs of the buildings. Sandwich panel production is made in different insulation types including PUR, PIR. You can decide which type of sandwich panel is suitable for your building/project by taking into consideration the thermal, humidity, sound insulation and fire resistance needs of thereof. Surface sheet thickness of sandwich panels ranges from 0.300 mm to 0.700 mm.
Sandwich panels are generally used in industrial facilities, commercial buildings, cold storages, residential buildings, power plants as well as buildings for agricultural and husbandry.
Corrugated steel sheets are used for roof coverage and siding of building or open shelters with high demand for watertightness, economy and speedy construction, where there is no need for heat insulation.
AMIC’s corrugated sheet are quick and easy to install. The edges have innovative design to insure complete watertightness even in very large support spans. The trapezoidal profile of the exterior coated sheet with intermediate minor ribbing ensures high strength in the usual range of load- bearing areas.
AMIC’s trapezoidal steel sheet are available in a wide range of thickness and colours.
Profile types: CS 35/200 (With depth of corrugation 35 mm & pitch of corrugation 200 mm)
CS 34 / 250 (With depth of corrugation 34 mm & pitch of corrugation 250 mm)
Materials: Aluzinc, Pre-painted Aluminum, Pre-painted galvanized iron
Thickness: 0.300 mm – 0.700 mm
Material finish: Mill finished, Polyester coated 20 – 25 microns paint thickness
Purlins are galvanized steel beams that allow you to safely attach roof and wall cladding sheets to buildings. The combination of our Z purlins and C section purlins provides a strong and sturdy complete structural solution ready for roofing and side cladding.
Z Purlins are designed to form the roof and wall joists of a building shell structure. They sit between the steel sheets and the building, acting as a support for the sheets to ensure it is firmly attached and safely in place.
C Purlins are designed to form the walls and floor joists of a building shell structure and are ideal for support beams for mezzanine flooring. They can also be used for door framing, roof trimming, window trimming, parapet rails and side rails.
Purlins thickness range available from (1.20 mm – 2.50 mm) with different height range from 100 mm to 300 mm.
Morbi mi eget egestas vulputate quisque tempor metus donec integer viverra ac purus pulvinar iaculis eu nec bibendum auctor.
Viverra tempor, turpis egestas lectus enim viverra diam est tincidunt tortor sit pretium pulvinar non maecenas aliquet in cursus egestas ac elit massa ut et in gravida magna.
Single skin Ridge caps are used to cap the ridge of a roofing system with sandwich panels or corrugated surface. It acts as a protective barrier against water infiltration and preventing leaks.
Decking sheets are used on mezzanine beams for flooring. The lightweight steel decking panel reduces concrete usage to provide a cost-effective and alternative floor solution that is easy to install.
Gutters and flashings are important components of a building's roofing & wall cladding that play a crucial role in protecting the structure from water leakage.
Skylight is an optimal appliance to enable daylight to the interior of the building. This applies especially to longs span roofs, where skylights are one of the the way to effectively fulfill requirements of even daylight spread inside the Building.
Skylight panels are laid at the roof surface level. There is different type of skylights available according to light transmission capacity. AMIC provides Clear and faded types sky lights to fit profile of sandwich panels and corrugated sheets. Main advantage of skylight is in commercial buildings such as warehouses or factories, where natural lighting can reduce the need for artificial lighting and lower energy costs.
The wide cover and low rib height of Liner sheet makes for near-flat usage suitable for a range of applications. Its longitudinal flutes provide rigidity and strength along the length of the sheet while retaining full flexibility across the width.
Structural steel is a type of steel that is commonly used in the construction industry for structures such as buildings and other PEB structures. Structural steel is available in various shapes and sizes, including I-beams, H-beams, angles, channels.
It has a high strength-to-weight ratio, which makes it suitable for use in structures that require high strength and stability.
AMIC have wide range of stock for following structural steel components
Main suspension parts:
Wall angle
Main channel
Furring channel
AMIC T Grid Suspension System is an aesthetically appealing exposed ceiling grid system that provides a variety of major benefits of improved strength, lower weight, better spring tension characteristics and enhanced screw retention.
Stud
Track
Dry wall angle bead
Dry wall edge bead ( L Trim / J trim)
Hanex® Solid Surface is an acrylic solid surface material which is composed of Methyl Methacrylate (MMA) and Poly Methyl Methacrylate (PMMA) resin filled with Alumina-Trihydrate and other specialized formula to give it a timeless quality.
BENEFITS OF HANEX SOLID SURFACES
Angle beads
Plaster stop bead
Architrave beads
Enhance your construction projects with our durable brick mesh, engineered to reinforce and stabilize masonry structures for lasting strength and integrity.
AMI insulated gutters are the ideal solution for rainwater management. Gutters are the critical elements in the weather proofing of a building, especially gutters classed as internal such as valley or boundary wall gutters.
